Shot-Gun Shells & Rimfire


The Gi- HALO, an ammunition inspection system uses a series of  four advanced proprietary vision systems to detect defects. This Multi-View system provides images from all around the part.  8 images (4 Frontlit and 4 Backlit) from the four cameras give an ability to measure all dimensions and find visual defects (like cracks, laminations, draw scratches, porosity, etc…).


  • Size: 63″ x 72″ x 98″  2,100lbs
  • Rates: Up to 300 PPM
  • Part Diameter Range: 2 mm to 38 mm
  • Part Length Range: 10 mm to 100 mm
  • Power: 110v-230VAC 50-60Hz 1 Phase

The Gi-HALO is designed to accommodate Shot gun shells 

Backlit Lighting

Provides measurement of dimensional characteristics. Has the ability to measure max, min or average, simultaneously or separately: Radii, Concentricity, Straightness, Head space and length, over all lengths,  tapers etc

Front lighting

The same 4 cameras providing dimensional measurements, are also detecting surface imperfections such as; draw scratches, gouges, burrs, smears, discoloration, cracks, dents and lamination’s.

Optional Stations

Primer Vision

Mouth Vision

Eddy Current