Fastener Sorting System

[two]

machine

 

 

 

 

 

 

 

[/two][two_last] EMAIL_US_BUTTON

  • Size: 192″ x 72″ x 84″   1600lbs
  • Rates: Up to 800 PPM
  • Part Diameter Range: 2mm-40mm
  • Part Length Range: 4mm-175mm
  • Power: 110v-240VAC 50-60Hz 1 Phase
    bits     

    The Gi-720 is designed to accommodate parts that have less than 5:1 length to diameter ratio.   

[/two_last][clear /]

[one]

This high speed inspection machine uses a single conveyor and standard eight proprietary vision cameras to detect dimensional and surface defects at inspection rates up to 800ppm. This Multi-View system provides 360o part coverage, 16 images (8 Front-lit and 8 Backlit) resulting in complete dimensional and visual defect detection. [/one][divider /][clear /]

[two]Front lighting: The same 8 cameras providing dimensional measurements, are also detecting surface imperfections such as; Damaged threads, scratches, gouges, flakes, burrs, smears, discoloration, chips, cracks, dents, laminations, plating/coating defects and porosity.

[/two][two_last]1[/two_last]

[one]2Back lighting: Parts are transported through the Gi-720 on a conveyor, 8 cameras measure dimensional characteristics. All external part features are measured to max, min or average simultaneously or separately: Features such as lengths, diameters, radii, concentricity, straightness, and threads are measured to print specifications.

[/one]

 

Optical Stations
Top/Bottom Vision Axial Viewer Internal Viewer Eddy Current Laser Topography