Pistol Case and Cup Inspection System

Cups & Primer Sorting

FOR PISTOL CASE AND CUP INSPECTION

The Gi-100 ammunition inspection system is a high-speed vision based measuring machine used for case and cup inspection. This system incorporates a series of front and back lit cameras to calculate a part’s height, profile and inner/outer diameters.

SPECS

  • Size: 72″ x 60″ x 84.5″ 2000 Lbs
  • Rates: Up to 600PPM
  • Part Diameter Range: 2mm – 40mm
  • Part Length Range: 10mm – 60mm
    (special specs available upon request)
  • Power: 110v-240VAC 50-60Hz 1 Phase

This Automated Inspection Equipment machine, the Gi-100 is the perfect machine for cup manufacturers whose goal is zero defects.

Cups

Primer Cups

40 mm Cases

Bullet Cups

 
Optional cameras are available to check for internal and external surface imperfections. And optional Eddy Current lets you check for metallurgical defects such as cracks and seams.

• Measures Cups
• Windows Based Software
• Optional: Additional Vision Cameras and Eddy Current
• Up to 600 Parts Per Minute
• Optional Packaging Systems

Microsoft Windows based software makes part setup easy, and allows for part storage and retrieval.

360° Internal Wall Inspection

Gi incorporates hole inspection optics to specifically image and measure both the bottom of a hole and its vertical walls. This allows great detail of I.D. walls and the detection of very small defects like; chips, voids, cracks or other surface imperfections.

360° OD Inspection

Gi incorporates hole inspection optics to specifically image and measure both the bottom of a hole and its vertical walls. This allows great detail of I.D. walls and the detection of very small defects like; chips, voids, cracks or other surface imperfections. [verbiage to change, external instead of internal]